Chapter 30 User Account
VMG3925-B10A User’s Guide
234
Figure 141 Maintenance > User Account > Add/Edit
The following table describes the labels in this screen.
Table 112 Maintenance > User Account > Add/Edit
LABEL DESCRIPTION
User Name Enter a new name for the account. This field displays the name of an existing account.
Password Type your new system password (up to 256 characters). Note that as you type a password,
the screen displays a (*) for each character you type. After you change the password, use
the new password to access the VMG.
Verify Password Type the new password again for confirmation.
Retry Times Enter the number of times consecutive wrong passwords can be entered for this account. 0
means there is no limit.
Idle Timeout Enter the length of inactive time before the VMG will automatically log the user out of the
web configurator.
Lock Period Enter the length of time a user must wait before attempting to log in again after a number if
consecutive wrong passwords have been entered as defined in Retry Times.
Group Specify whether this user will have Administrator or User privleges.
OK ClickOK to save your changes.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
