Chapter 4 Tutorials
VMG3925-B10A User’s Guide
49
Tutorial: Advanced > QoS > Class Setup
Class Name Give a class name to this traffic, such as E-mail in this example.
From
Interface
This is the interface from which the traffic will be coming from. Select LAN1 for this
example.
Ether Type Select IP to identify the traffic source by its IP address or MAC address.
IP Address Type the IP address of your computer - 192.168.1.23. Type the IP Subnet Mask if you
know it.
MAC Address Type the MAC address of your computer - AA:FF:AA:FF:AA:FF. Type the MAC Mask if you
know it.
To Queue
Index
Link this to an item in the Network Setting > QoS > Queue Setup screen, which is the E-
mail queue created in this example.
To Next Page
Loading...
