Chapter 6 Broadband
VMG3925-B10A User’s Guide
74
Use the
following static
DNS IP address
Select this to have the VMG use the DNS server addresses you configure manually.
Primary
DNS server
Enter the first DNS server address assigned by the ISP.
Secondary
DNS server
Enter the second DNS server address assigned by the ISP.
Enable E-mail
Notification
Select this to enable the e-mail notification function. The VMG will e-mail you a notification
when the 3G connection is up.
Mail Account Select a mail account for the e-mail address specified below.
If you do not select a mail account, e-mail notifications cannot be sent via e-mail. You must
have configured a mail account already in the Maintenance > E-mail Notification screen.
3G Backup E-
mail Title
Type a title that you want to be in the subject line of the e-mail notifications that the VMG
sends.
Send
Notification to
E-mail
Notifications are sent to the e-mail address specified in this field. If this field is left blank,
notifications cannot be sent via e-mail.
Advanced Click this to show the advanced 3G backup settings.
Budget Setup
Enable Budget
Control
Select Enable to set a monthly limit for the user account of the installed 3G card. You can
set a limit on the total traffic and/or call time. The VMG takes the actions you specified when
a limit is exceeded during the month.
Time Budget Select this and specify the amount of time (in hours) that the 3G connection can be used
within one month. If you change the value after you configure and enable budget control,
the VMG resets the statistics.
Data Budget
(Mbytes)
Select this and specify how much downstream and/or upstream data (in Mega bytes) can be
transmitted via the 3G connection within one month.
Select Download/Upload to set a limit on the total traffic in both directions.
Select Download to set a limit on the downstream traffic (from the ISP to the VMG).
Select Upload to set a limit on the upstream traffic (from the VMG to the ISP).
If you change the value after you configure and enable budget control, the VMG resets the
statistics.
Data Budget
(kPackets)
Select this and specify how much downstream and/or upstream data (in k Packets) can be
transmitted via the 3G connection within one month.
Select Download/Upload to set a limit on the total traffic in both directions.
Select Download to set a limit on the downstream traffic (from the ISP to the VMG).
Select Upload to set a limit on the upstream traffic (from the VMG to the ISP).
If you change the value after you configure and enable budget control, the VMG resets the
statistics.
Reset all
budget
counters on
Select the date on which the VMG resets the budget every month. Select last if you want
the VMG to reset the budget on the last day of the month. Select specific and enter the
number of the date you want the VMG to reset the budget
Reset time and
data budget
counters
Click this button to reset the time and data budgets immediately. The count starts over with
the 3G connection’s full configured monthly time and data budgets. This does not affect the
normal monthly budget restart; so if you configured the time and data budget counters to
reset on the second day of the month and you use this button on the first, the time and data
budget counters will still reset on the second.
Table 11 Network Setting > Broadband > 3G Backup (continued)
LABEL DESCRIPTION
To Next Page
Loading...
