Chapter 9 VLAN
XGS2210 Series User’s Guide
122
Note: Protocol-based VLAN applies to un-tagged packets and is applicable only when you
use IEEE 802.1Q tagged VLAN.
Figure 96 Advanced Application > VLAN > VLAN Configuration > Protocol Based VLAN Setup
(Standalone mode)
Figure 97 Advanced Application > VLAN > VLAN Configuration > Protocol Based VLAN Setup (Stacking
mode)
The following table describes the labels in this screen.
Table 49 Advanced Application > VLAN > VLAN Configuration > Protocol Based VLAN Setup
LABEL DESCRIPTION
Active Check this box to activate this protocol based VLAN.
Port Type a port to be included in this protocol based VLAN. In stacking mode, the first box field is the
slot ID and the second field is the port number.
This port must belong to a static VLAN in order to participate in a protocol based VLAN. See
Chapter 9 on page 106 for more details on setting up VLANs.
Name Enter up to 32 alpha numeric characters to identify this protocol based VLAN.
To Next Page
Loading...
