Chapter 39 ZULD
XGS2210 Series User’s Guide
393
39.3 ZULD Configuration
Use this screen to enable ZULD on a port, configure a mode and set the probe time. To open this screen,
click Advanced Application > ZULD > Configuration.
Figure 303 Advanced Application > ZULD > Configuration (Standalone mode)
Remote MAC Addr This is the MAC address of the port on the connected device to which the port of the Switch
is connected.
Remote Port This is the port number of the port on the connected device to which the port of the Switch is
connected.
Table 172 Advanced Application > ZULD Status (continued)
LABEL DESCRIPTION
To Next Page
Loading...
