ZyXEL Communications XGS2210-28 - Anti-Arpscan Host Status

Chapter 36 Anti-Arpscan
XGS2210 Series User’s Guide
371
Figure 284 Advanced Application > Anti-Arpscan Status (Stacking mode)
The following table describes the labels in this screen.
36.3 Anti-Arpscan Host Status
Use this screen to view blocked hosts and unblock ones connected to certain ports. To open this screen,
click Advanced Application > Anti-Arpscan > Host Status.
Figure 285 Advanced Application > Anti-Arpscan > Host Status
Table 162 Advanced Application > Anti-Arpscan Status
LABEL DESCRIPTION
Anti-Arpscan is.... This shows whether Anti-arpscan is enabled or disabled on the Switch.
Slot (Stacking
mode)
This field appears only in stacking mode. Click the drop-down list to choose the slot number of
the Switch in a stack.
Port This field displays the port number of the Switch. In stacking mode, the first number is the slot
ID and the second is the port number.
Trusted This field displays whether the port is trusted or untrusted. Anti-arpscan is not performed on a
trusted port.
State This field displays whether the port can forward traffic normally (Forwarding) or is disabled (Err-
Disable).