Chapter 3 Hardware Panels
XGS2210 Series User’s Guide
32
3.3 LEDs
After you connect the power to the Switch, view the LEDs to ensure proper functioning of the Switch
and as an aid in troubleshooting.
Table 4 LED Descriptions
LED COLOR STATUS DESCRIPTION
PWR Green On The system is receiving power from the power module in the power slot. The
Switch is acting as a non-master member in a stack or it is in standalone
mode.
Blue On The Switch is acting as the master in stacking.
Off The system is not receiving power from the power module in the power slot.
SYS Green On The system is on and functioning properly.
Blinking The system is rebooting and performing self-diagnostic tests.
Red On The system is functioning abnormally.
Off The power is off or the system is not ready/malfunctioning.
FAN Green On The fan is functioning properly.
Amber On The fan is not functioning at a proper speed or malfunctioning.
LOCATOR Blue Blinking Shows the actual location of the Switch between several devices in a rack.
The default timer is 30 minutes when you are configuring the Switch.
Off The locator is not functioning or malfunctioning.
PoE MAX Green On PoE power usage is over 80 percent of the power supplied budget, but
below 95 percent of the power supplied budget.
Amber On PoE power usage is more than 95 percent of the power supplied budget.
Off PoE power usage is below 80 percent of the power supplied budget.
10/100/1000Base-T Ports
1-48 LNK/ACT
(Left)
Green On The link to a 10 Mbps or a 1000 Mbps Ethernet network is up.
Blinking The system is transmitting/receiving to/from a 10 Mbps or a 1000 Mbps
Ethernet network.
Amber On The link to a 100 Mbps Ethernet network is up.
Blinking The system is transmitting/receiving to/from a 100 Mbps Ethernet network.
Off The link to an Ethernet network is down.
PoE 10/100/1000Base-T Ports
1-48 LNK/ACT
(Left)
Green On The link to a 10 Mbps or a 1000 Mbps Ethernet network is up.
Blinking The system is transmitting/receiving to/from a 10 Mbps or a 1000 Mbps
Ethernet network.
Amber On The link to a 100 Mbps Ethernet network is up.
Blinking The system is transmitting/receiving to/from a 100 Mbps Ethernet network.
Off The link to an Ethernet network is down.
1-48 PoE (Right) Green On Power supplied to all PoE Ethernet ports meets the IEEE 802.3at standard.
Amber On Power supplied to all PoE Ethernet ports meets the IEEE 802.3af standard.
Off There is no power supplied.
1G/10G SFP+ Slots
To Next Page
Loading...
