Chapter 8 Basic Setting
XGS2210 Series User’s Guide
81
Figure 60 Basic Setting > PoE Setup > PoE Time Range Status (Stacking mode)
The following table describes the labels in this screen.
8.8.2 PoE Setup
Use this screen to set the priority levels, power-up mode and schedule for the Switch in distributing power
to PDs.
Click the PoE Setup link in the Basic Setting > PoE Status screen. The following screen opens.
Table 21 Basic Setting > PoE Setup > PoE Time Range Status
LABEL DESCRIPTION
Slot (Stacking
mode)
This field appears only in stacking mode. Click the drop-down list to choose the slot number of the
Switch in a stack.
Port This is the number of the port on the Switch. In stacking mode, the first number represents the slot
and the second the port number.
Time Range This field displays the name of the schedule which is applied to the port. PoE is enabled at the
specified time/date.
state This field displays whether the port can receive power from the Switch (In) or not (Out) currently.
It shows - if there is no schedule applied to the port.
To Next Page
Loading...
