ZyXEL Communications XGS2210-28 - Configuring Switch Management IP Address

XGS2210 Series User’s Guide
47
Figure 27 Initial Setup Network Example: Port VID
1 Click Advanced Applications > VLAN > VLAN
Configuration in the navigation panel. Then click
the VLAN Port Setup link.
2 Enter 2 in the PVID field for port 2 and click Apply to
save your changes back to the run-time memory.
Settings in the run-time memory are lost when the
Switch’s power is turned off.
5.2 Configuring Switch Management IP Address
The default management IP address of the Switch is 192.168.1.1. You can configure another IP address in
a different subnet for management purposes. The following figure shows an example.