Chapter 37 BPDU Guard
XGS2210 Series User’s Guide
378
The following table describes the labels in this screen.
37.3 BPDU Guard Configuration
Use this screen to turn on the BPDU guard feature on the Switch and port(s).
In the BPDU Guard Status screen click Configuration to display the configuration screen as shown.
Figure 291 Advanced Application > BPDU Guard > BPDU Guard Configuration (Standalone mode)
Table 166 Advanced Application > BPDU Guard Status
LABEL DESCRIPTION
BPDU guard
globally
configuration
This field displays whether BPDU guard is activated on the Switch.
Slot (Stacking
mode)
This field appears only in stacking mode. Click the drop-down list to choose the slot number of
the Switch in a stack.
Port This is the number of the port on the Switch. In stacking mode, the first number is the slot ID and
the second is the port number.
Active This shows whether BPDU guard is activated on the port.
Status This shows whether the port is shut down (Err-disable) or able to transmit packets (Forwarding).
To Next Page
Loading...
