Chapter 16 Mirroring
XGS2210 Series User’s Guide
177
The following table describes the labels in this screen.
Table 68 Advanced Application > Mirroring
LABEL DESCRIPTION
Active Select this check box to activate port mirroring on the Switch. Clear this check box to disable the
feature.
Monitor
Port
The monitor port is the port you copy the traffic to in order to examine it in more detail without
interfering with the traffic flow on the original port(s). Enter the port number of the monitor port. In
stacking mode, the first number represents the slot and the second the port number.
Slot
(Stacking
mode)
This field appears only in stacking mode. Click the drop-down list to choose the slot number of the
Switch in a stack.
Port
(Standalon
e or
stacking
mode)
This field displays the port number. In stacking mode, the first number is the slot ID and the second is
the port number. * means all ports.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set the
common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Mirrored Select this option to mirror the traffic on a port.
Direction Specify the direction of the traffic to mirror by selecting from the drop-down list box. Choices are
Egress (outgoing), Ingress (incoming) and Both.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these changes if
it is turned off or loses power, so use the Save link on the top navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Cancel Click Cancel to reset the fields.
To Next Page
Loading...
