XGS2210 Series User’s Guide
221
Figure 166 Advanced Application > Queuing Method (Stacking mode)
The following table describes the labels in this screen.
Table 87 Advanced Application > Queuing Method
LABEL DESCRIPTION
Slot
(Stacking
mode)
This field appears only in stacking mode. Click the drop-down list to choose the slot number of the
Switch in a stack.
Port
(Standalo
ne or
stacking
mode)
This label shows the port you are configuring. In stacking mode, the first number is the slot ID and the
second is the port number. * means all ports.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set the
common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
To Next Page
Loading...
