Chapter 31 Error Disable
XGS2210 Series User’s Guide
324
Figure 247 Advanced Application > Errdisable > Errdisable Status (Stacking mode)
The following table describes the labels in this screen.
Table 142 Advanced Application > Errdisable > Errdisable Status
LABEL DESCRIPTION
Inactive-reason mode reset
Port List Enter the number of the port(s) (separated by a comma) on which you want to reset inactive-
reason status.
Cause Select the cause of inactive-reason mode you want to reset here.
Reset Press to reset the specified port(s) to handle ARP, BPDU or IGMP packets instead of ignoring
them, if the port(s) is in inactive-reason mode.
To Next Page
Loading...
