Chapter 44 Maintenance
XGS2210 Series User’s Guide
429
Figure 338 Management > Maintenance > Firmware Upgrade
Figure 339 Management > Maintenance > Firmware Upgrade (Stacking mode)
Type the path and file name of the firmware file you wish to upload to the Switch in the File Path text box
or click Browse to locate it (Firmware upgrades are only applied after a reboot). Click Upgrade to load
the new firmware.
After the firmware upgrade process is complete, see the System Info screen to verify your current
firmware version number.
Table 193 Management > Maintenance > Firmware Upgrade
LABEL DESCRIPTION
Slot (Stacking mode) This is the slot index number.
Name This is the name of the Switch that you’re configuring.
To Next Page
Loading...
