Chapter 1 Introducing the XMG
XMG3512-B10A User’s Guide
19
Figure 6 LEDs on the XMG
None of the LEDs are on if the XMG is not receiving power.
Table 1 LED Descriptions
LED COLOR STATUS DESCRIPTION
Power
Green On The XMG is receiving power and ready for use.
Blinking The XMG is self-testing.
Red On The XMG detected an error while self-testing, or there is a device
malfunction.
Blinking The XMG is upgrading its firmware.
Off The XMG is not receiving power.
DSL1
DSL2
Green On The ADSL line is up.
Blinking The XMG is initializing the ADSL line.
Amber On The VDSL line is up.
Blinking The XMG is initializing the VDSL line.
Off The DSL line is down.
SFP
Green On The XMG has a successful connection on the WAN.
Blinking The XMG is sending or receiving data to/from the WAN.
Off The XMG does not detect a SFP connection to the WAN.
To Next Page
Loading...
