ZyXEL Communications XMG3512-B10A - Page 193

Chapter 18 Parental Control
XMG3512-B10A User’s Guide
193
The following table describes the fields in this screen.
Table 87 Parental Control Rule: Add/Edit
LABEL DESCRIPTION
General
Active Select to enable or disable this parental control rule.
Parental Control
Profile Name
Enter a descriptive name for the rule.
Home Network
User
Select the LAN user that you want to apply this rule to from the drop-down list box. If you select
Custom, enter the LAN user’s MAC address. If you select All, the rule applies to all LAN users.
Rule List In Home Network User, select Custom, enter the LAN user’s MAC address, then click the Add
icon to enter a computer MAC address for this PCP. Up to five are allowed. Click the Delete icon
to remove one.
Internet Access Schedule
Day Select check boxes for the days that you want the XMG to perform parental control.
Time Drag the time bar to define the time that the LAN user is allowed access (Authorized access) or
denied access (No access). Click the Add icon above the time bar to add a new time bar. Up
to three are allowed.
Network Service
Network Service
Setting
If you select Block, the XMG prohibits the users from viewing the Web sites with the URLs listed
below.
If you select Allow, the XMG blocks access to all URLs except ones listed below.
Add New
Service
Click this to show a screen in which you can add a new service rule. You can configure the
Service Name, Protocol, and Name of the new rule.
# This shows the index number of the rule.
Service Name This shows the name of the rule.
Protocol:Port This shows the protocol and the port of the rule.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Site/URL Keyword
Block or Allow
the Web Site
If you select Block the Web URLs, the XMG prohibits the users from viewing the Web sites with the
URLs listed below.
If you select Allow the Web URLs, the XMG blocks access to all URLs except ones listed below.
Add Click Add to show a screen to enter the URL of web site or URL keyword to which the XMG blocks
or allows access.
# This shows the index number of the rule.
WebSite This shows the URL of web site or URL keyword to which the XMG blocks or allows access.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.