Chapter 18 Parental Control
XMG3512-B10A User’s Guide
194
Click Security > Parental Control > Add/Edit Rule > Add New Service to open the following screen.
Figure 117 Parental Control Rule: Add/Edit Rule > Add New Service
The following table describes the fields in this screen.
Redirect
blocked site to
Zyxel Family
Safety page
Select this to redirect users who access any blocked websites listed above to the Zyxel Family
Safety page as shown next.
Figure 116 Zyxel Family Safety Page Example
OK Click OK to save your changes.
Cancel Click Cancel to to exit this screen without saving.
Table 88 Parental Control Rule: Add/Edit Rule > Add New Service
LABEL DESCRIPTION
Service Name Select the name of the service. Otherwise, select User Define and manualy specify
the protocol and the port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not
be configurable.
Protocol Select the transport layer protocol used for the service. Choices are TCP, UDP, or TCP
& UDP.
Port Enter the port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not
be configurable.
Table 87 Parental Control Rule: Add/Edit (continued)
LABEL DESCRIPTION
To Next Page
Loading...
