Chapter 2 The Web Configurator
XMG3512-B10A User’s Guide
28
Routing Static Route Use this screen to view and set up static routes on the XMG.
DNS Route
Use this screen to forward DNS queries for certain domain names through
a specific WAN interface to its DNS server(s).
Policy Route
Use this screen to configure policy routing on the XMG.
RIP Use this screen to configure Routing Information Protocol to exchange
routing information with other routers.
QoS General Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Queue Setup Use this screen to configure QoS queues.
Classification
Setup
Use this screen to define a classifier.
Shaper Setup Use this screen to limit outgoing traffic rate on the selected interface.
Policer Setup Use this screen to configure QoS policers.
NAT Port Forwarding Use this screen to make your local servers visible to the outside world.
Applications Use this screen to configure servers behind the XMG.
Port Triggering Use this screen to change your XMG’s port triggering settings.
DMZ Use this screen to configure a default server which receives packets from
ports that are not specified in the Port Forwarding screen.
ALG Use this screen to enable or disable SIP ALG.
Address Mapping Use this screen to change your XMG’s address mapping settings.
Sessions Use this screen to configure the maximum number of NAT sessions each
client host is allowed to have through the XMG.
DNS DNS Entry Use this screen to view and configure DNS routes.
Dynamic DNS Use this screen to allow a static hostname alias for a dynamic IP address.
Vlan Group Vlan Group Use this screen to group and tag VLAN IDs to outgoing traffic from the
specified interface.
Interface
Grouping
Interface
Grouping
Use this screen to map a port to a PVC or bridge group.
USB Service File Sharing Use this screen to enable file sharing via the XMG.
Media Server Use this screen to use the XMG as a media server.
Security
Firewall General Use this screen to configure the security level of your firewall.
Protocol Use this screen to add Internet services and configure firewall rules.
Access Control Use this screen to enable specific traffic directions for network services.
DoS Use this screen to activate protection against Denial of Service (DoS)
attacks.
MAC Filter MAC Filter Use this screen to block or allow traffic from devices of certain MAC
addresses to the XMG.
Parental
Control
Parental Control Use this screen to block web sites with the specific URL.
Scheduler Rules Scheduler Rules Use this screen to configure the days and times when a configured
restriction (such as parental control) is enforced.
Certificates Local Certificates Use this screen to view a summary list of certificates and manage
certificates and certification requests.
Trusted CA
Use this screen to view and manage the list of the trusted CAs.
Table 4 Navigation Panel Summary (continued)
LINK TAB FUNCTION
To Next Page
Loading...
