ZyXEL Communications XMG3512-B10A - Page 29

Chapter 2 The Web Configurator
XMG3512-B10A User’s Guide
29
System Monitor
Log System Log Use this screen to view the status of events that occurred to the XMG.
You can export or e-mail the logs.
Security Log Use this screen to view all security related events. You can select level
and category of the security events in their proper drop-down list
window.
Levels include:
•Emergency
•Alert
• Critical
• Error
• Warning
•Notice
• Informational
•Debugging
Categories include:
• Account
• Attack
•Firewall
• MAC Filter
Traffic Status WAN Use this screen to view the status of all network traffic going through the
WAN port of the XMG.
LAN Use this screen to view the status of all network traffic going through the
LAN ports of the XMG.
NAT Use this screen to view NAT statistics for connected hosts.
ARP table ARP table Use this screen to view the ARP table. It displays the IP and MAC address
of each DHCP connection.
Routing Table Routing Table Use this screen to view the routing table on the XMG.
Multicast Status IGMP Status Use this screen to view the status of all IGMP settings on the XMG.
MLD Status Use this screen to view the status of all MLD settings on the XMG.
xDSL Statistics xDSL Statistics Use this screen to view the XMG’s xDSL traffic statistics.
Maintenance
System System
Use this screen to set Device name and Domain name.
User Account User Account Use this screen to change user password on the XMG.
Remote
Management
MGMT Services Use this screen to enable specific traffic directions for network services.
Trust Domain Use this screen to view a list of public IP addresses which are allowed to
access the XMG through the services configured in the Maintenance >
Remote Management screen.
SNMP SNMP Use this screen to configure SNMP (Simple Network Management
Protocol) settings.
Time Time Use this screen to change your XMG’s time and date.
E-mail
Notification
E-mail
Notification
Use this screen to configure up to two mail servers and sender addresses
on the XMG.
Log Setting Log Setting Use this screen to change your XMG’s log settings.
Firmware
Upgrade
Firmware
Upgrade
Use this screen to upload firmware to your XMG.
Table 4 Navigation Panel Summary (continued)
LINK TAB FUNCTION