Chapter 2 The Web Configurator
XMG3512-B10A User’s Guide
30
Backup/Restore Backup/Restore Use this screen to backup and restore your XMG’s configuration
(settings) or reset the factory default settings.
Reboot Reboot Use this screen to reboot the XMG without turning the power off.
Diagnostic Ping&Traceroute
&Nslookup
Use this screen to identify problems with the DSL connection. You can
use Ping, TraceRoute, or Nslookup to help you identify problems.
802.1ag Use this screen to configure CFM (Connectivity Fault Management) MD
(maintenance domain) and MA (maintenance association), perform
connectivity tests and view test reports.
OAM Ping Use this screen to view information to help you identify problems with the
DSL connection.
Table 4 Navigation Panel Summary (continued)
LINK TAB FUNCTION
To Next Page
Loading...
