112/749
Type the Rule Name used to identify this VPN connection (and VPN gateway). You
may use 1-31 alphanumeric characters. This value is case-sensitive. Select the rule
to be Site-to-site. Click Next.
Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Scenario)
Then, configure the Secure Gateway IP as the Hub_HQ’s Gateway IP address (in
the example, 172.16.10.1). Type a secure Pre-Shared Key (8-32 characters) which
must match your Hub_HQ’s Pre-Shared Key.
Set Local Policy to be the IP address range of the network connected to the
Spoke_Branch_B and Remote Policy to be the IP address range of the network
connected to the Hub_HQ. Click OK.
Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Configuration)
To Next Page
Loading...
