308/749
Test the L2TP over IPSec VPN Tunnel
1. Go to ZyWALL/USG CONFIGURATION > VPN > IPSec VPN > VPN Connection, the
Status connect icon is lit when the interface is connected.
CONFIGURATION > VPN > IPSec VPN > VPN Connection
2. Go to ZyWALL/USG MONITOR > VPN Monitor > IPSec and verify the tunnel Up Time
and the Inbound(Bytes)/Outbound(Bytes) traffic. Click Connectivity Check to
verify the result of ICMP Connectivity.
Hub_HQ > MONITOR > VPN Monitor > IPSec > WIZ_L2TP_VPN
To Next Page
Loading...
