539/749
Set Up the ADP Profile on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > Security Policy > ADP > Profile, click
the Add icon. A pop-up screen will appear allowing you to choose a base profile.
Select a base profile to go to the profile details screen.
CONFIGURATION > Security Policy > ADP > Profile > Base Profile
The Traffic Anomaly screen will display. A Name is automatically generated that you can edit.
Enable or disable individual scan or flood types by selecting a row and clicking
Activate or Inactivate.
In the Scan Detection section, selecting levels in the Sensitivity drop-down menu
and set Block Period for the duration applies blocking to the source IP address.
In the Flood Detection section, set Block Period for the duration applies blocking to
the destination IP address. Set a Threshold number (the number of packets per
second that match the flood detection criteria) for your network. Click OK.
CONFIGURATION > Security Policy > ADP > Profile > Base Profile > Traffic Anomaly
To Next Page
Loading...
