674/749
How to Allow Public Access to a Server Behind
ZyWALL/USG
This is an example of using ZyWALL/USG to configure a securely access to internal
server behind ZyWALL/USG with network address translation (NAT). The Internet
users can reach this server directly by its public IP address and a NAT mapping rule
will forward the traffic from the Internet to the Intranet. It provides security and
decrease the number of IP addresses an organization needs.
ZyWALL/USG enables Public Access to a Server with NAT
Note: All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This
example was tested using USG310 (Firmware Version: ZLD 4.25).
To Next Page
Loading...
