ZyXEL Communications ZyWALL 310 - How to Set up Ipv6 Interfaces for Pure Ipv6 Routing

710/749
www.zyxel.com
How to Set Up IPv6 Interfaces for Pure IPv6 Routing
This example shows how to configure your ZyWALL/USG WAN and LAN interfaces
which connects two IPv6 networks. ZyWALL/USG periodically advertises a network
prefix of 2002:1111:1111:1111::/64 to the LAN through router advertisements.
ZyWALL/USG with Pure IPv6 Network Example
Note: All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This
example was tested using USG310 (Firmware Version: ZLD 4.25).