ZyXEL Communications ZyWALL 310 - Set up the Active Directory Server Account on the Zywall;Usg

705/749
www.zyxel.com
CONFIGURATION > Web Authentication > General Settings
Set Up the Active Directory Server Account on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > Object > AAA Server > Active
Directory > Add Active Directory to configure the AD sever. Enter the Server
Address (192.168.1.33 in this example) and Based DN (dc=cso,dc=net in this
example). Specify the Bind DN for logging into the AD server
(cn=Administrator,cn=users,dc=cso,dc=net in this example). If required, enter the
Password for the ZyWALL/USG to bind (or log in) to the AD server.
CONFIGURATION > Object > AAA Server > Active Directory > Add Active Directory
Scroll down to the Configuration Validation section, use a user account from the
server specified above to test if the configuration is correct. Enter the account’s
user name (wifi_guest in this example) in the Username field and click Test. A
pop-up screen will appear allowing you to view the test result. Click OK to save the
configuration.