ZyXEL Communications ZyWALL 310 - Set up the Zywall;Usg Ipsec VPN Tunnel of Corporate Network (HQ)

230/749
www.zyxel.com
Set Up the ZyWALL/USG IPSec VPN Tunnel of Corporate
Network (HQ)
In the ZyWALL/USG, go to CONFIGURATION >Quick Setup > VPN Setup Wizard,
use the VPN Settings wizard to create a VPN rule that can be used with the
remote ZyWALL/USG. Click Next.
Quick Setup > VPN Setup Wizard > Welcome
Choose Express to create a VPN rule with the default phase 1 and phase 2 settings
and use a pre-shared key to be the authentication method. Click Next.
Quick Setup > VPN Setup Wizard > Wizard Type
Type the Rule Name used to identify this VPN connection (and VPN gateway). You
may use 1-31 alphanumeric characters. This value is case-sensitive. Select the rule to
be Site-to-site. Click Next.