ZyXEL Communications ZyWALL 310 - Test the Ipsec VPN Tunnel

178/749
www.zyxel.com
Test the IPSec VPN Tunnel
Go to ZyWALL/USG CONFIGURATION > VPN > IPSec VPN > VPN Connection, click
Connect on the upper bar. The Status connect icon is lit when the interface is
connected.
CONFIGURATION > VPN > IPSec VPN > VPN Connection
Go to ZyWALL/USG MONITOR > VPN Monitor > IPSec and verify the tunnel Up Time
and Inbound(Bytes)/Outbound(Bytes) traffic.
MONITOR > VPN Monitor > IPSec
Go to FortiGate VPN > Monitor > IPsec Monitor and check the tunnel Status is up
and Incoming Data/Outgoing Data traffic.
VPN > Monitor > IPsec Monitor