253/749
Go to ZyWALL/USG CONFIGURATION > VPN > IPSec VPN > VPN Connection, click
Connect on the upper bar. The Status connect icon is lit when the interface is
connected.
CONFIGURATION > VPN > IPSec VPN > VPN Connection
Go to ZyWALL/USG MONITOR > VPN Monitor > L2TP over IPSec and verify the Current
L2TP Session.
MONITOR > VPN Monitor > L2TP over IPSec > L2TP_Remote_Users
Go to iOS mobile device Menu > Settings > VPN > ZyXEL_L2TP and verify the
Assigned IP Address and Connect Time.
To Next Page
Loading...
