37/749
On the Create virtual network page, enter the NAME for the VPN network. For
example, VPN_Vnet_to_USG. Add your Address Space, Subnet name and a single
Subnet address range.
Click Resource group and either select an existing resource group, or create a
new one by typing a name for your new resource group. For example, RG_USG.
LOCATION is directly related to the physical location (region) where the virtual
machines (VMs) reside. The region associated with the virtual network cannot be
changed after it has been created.
Then, click the Create button. After clicking Create, you will see a tile on your
dashboard that will reflect the progress of your VNet. The tile will change as the
VNet is being created.
To Next Page
Loading...
