1-3
Configuration procedure
# Add GigabitEthernet1/0/2, GigabitEthernet1/0/3, and GigabitEthernet1/0/4 to the isolation group.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface GigabitEthernet1/0/2
[Sysname-GigabitEthernet1/0/2] port isolate
[Sysname-GigabitEthernet1/0/2] quit
[Sysname] interface GigabitEthernet1/0/3
[Sysname-GigabitEthernet1/0/3] port isolate
[Sysname-GigabitEthernet1/0/3] quit
[Sysname] interface GigabitEthernet1/0/4
[Sysname-GigabitEthernet1/0/4] port isolate
[Sysname-GigabitEthernet1/0/4] quit
[Sysname] quit
# Display information about the ports in the isolation group.
<Sysname> display isolate port
Isolated port(s) on UNIT 1:
GigabitEthernet1/0/2, GigabitEthernet1/0/3, GigabitEthernet1/0/4
To Next Page
Loading...
