4-1
4 Device Management
When configuring device management, go to these sections for information you are interested in:
z Introduction to Device Management
z Device Management Configuration
z Displaying the Device Management Configuration
z Remote Switch APP Upgrade Configuration Example
Introduction to Device Management
Device Management includes the following:
z Reboot the Ethernet switch
z Configure real-time monitoring of the running status of the system
z Specify the APP to be used at the next reboot
z Update the Boot ROM
z Identifying and Diagnosing Pluggable Transceivers
Device Management Configuration
Device Management Configuration Task list
Complete the following tasks to configure device management:
Task Remarks
Rebooting the Ethernet Switch Optional
Scheduling a Reboot on the Switch Optional
Configuring Real-time Monitoring of the Running Status of the
System
Optional
Specifying the APP to be Used at Reboot Optional
Upgrading the Boot ROM Optional
Identifying and Diagnosing Pluggable Transceivers Optional
Rebooting the Ethernet Switch
You can perform the following operation in user view when the switch is faulty or needs to be rebooted.
To Next Page
Loading...
