3Com 4200G 12-Port - Displaying and Maintaining Ipv6

1-15
To do… Use the command… Remarks
Enter system view
system-view
—
Enable the dynamic domain
name resolution function
dns resolve
Required
Disabled by default.
Configure an IPv6 DNS server
dns server ipv6 ipv6-address
[ interface-type
interface-number ]
Required
If the IPv6 address of the DNS
server is a link-local address,
the interface-type and
interface-number arguments
are required.
Configure the domain suffix.
dns domain domain-name
Required
By default, no domain name
suffix is configured, that is, the
domain name is resolved
according to the input
information.
The dns resolve and dns domain commands are the same as those of IPv4 DNS. For details about
the commands, refer to DNS Operation in this manual.
Displaying and Maintaining IPv6
To do… Use the command… Remarks
Display DNS domain name suffix
information
display dns domain [ dynamic ]
Display IPv6 dynamic domain
name cache information.
display dns ipv6 dynamic-host
Display DNS server information display dns server [ dynamic ]
Display the FIB entries
display ipv6 fib
Display the mapping between
host name and IPv6 address
display ipv6 host
Display the brief IPv6 information
of an interface
display ipv6 interface [ interface-type
interface-number | brief ]
Display neighbor information
display ipv6 neighbors [ ipv6-address | all |
dynamic | interface interface-type
interface-number | static | vlan vlan-id ] [ | { begin
| exclude | include } regular-expression ]
Display the total number of
neighbor entries satisfying the
specified conditions
display ipv6 neighbors { all | dynamic | static |
interface interface-type interface-number | vlan
vlan-id } count
Display information about the
routing table
display ipv6 route-table [ verbose ]
Display information related to a
specified socket
display ipv6 socket [ socktype socket-type ]
[ task-id socket-id ]
Available in
any view