3Com 4200G 12-Port - Page 402

1-5
Network diagram
Figure 1-1 Network diagram for stack configuration
Configuration procedure
# Configure the IP address pool for the stack on Switch A.
<Sysname> system-view
[Sysname] stacking ip-pool 129.10.1.15 3
# Create the stack on switch A.
[Sysname] stacking enable
[stack_0.Sysname] quit
<stack_0.Sysname>
# Display the information about the stack on switch A.
<stack_0.Sysname> display stacking
Main device for stack.
Total members:3
Management-vlan:1(default vlan)
# Display the information about the stack members on switch A.
<stack_0.Sysname> display stacking members
Member number: 0
Name:stack_0.Sysname
Device: 4200G 12-Port
MAC Address:000f-e20f-c43a
Member status:Admin
IP: 129.10.1.15 /16
Member number: 1
Name:stack_1.Sysname
Device: 4200G 12-Port
MAC Address: 000f-e200-3130
Member status:Up