3Com ETHERLINK III User Manual

3-6 CHAPTER 3: INSTALLING THE NETWORK DRIVERS
12 Click Yes to restart your PC.
The driver installation is complete.
Windows NT Version 3.51
Follow these steps to install the network driver in a PC
running Windows NT version 3.51:
1 Install the 3C509B NIC and connect it to the network
as described in Chapter 2.
2 Restart the PC.
3 Start Windows NT.
4 In the Control Panel, double-click Network.
a If you have a NIC already installed, in the Network
Settings window, select the existing 3Com NIC in the
Installed Adapters group.
b Click Remove.
c Click Yes in the confirmation window.
d Click OK in the Network Settings window and then
click Restart Now.
e After rebooting, repeat steps 3 and 4.
5 In the Network Settings window, click Add Adapter.
6 In the Add Network Adapter window, select
<Other> Requires disk from manufacturer.
7 Click Continue.
8 Insert the EtherDisk diskette in floppy drive A
and click OK.
9 In the Select OEM Option box, select
3Com EtherLink III ISA Adapter (3C509B).
10 Click OK.
The bus location window appears.
11 Click OK.
Windows NT copies the files from the EtherDisk diskette.
If you are prompted for network information, contact
your system administrator for the requested information.

3Com ETHERLINK III Specifications

General

Brand	3Com
Model	ETHERLINK III
Category	Adapter
Language	English