3Com ETHERLINK III - Resolving Hardware Resource Conflicts

5-8 CHAPTER 5: TROUBLESHOOTING
Resolving Hardware Resource Conflicts with
Windows 95 and Windows NT
Use this procedure to resolve hardware resource conflicts
(I/O base address and interrupt values) using Windows 95
and Windows NT.
1 From the Start menu, select Help.
2 In the Help window, select the Contents tab.
3 Select Troubleshooting.
4 Double-click If you have a hardware conflict.
5 Click Start the Conflict Troubleshooter and follow
the instructions.
Changing the I/O Base Address or the Interrupt
Request Level
If you discover resource conflicts, you can change the I/O
base address or the interrupt request level (IRQ). To
change these values, follow these steps:
1 In the Control Panel, double-click System.
2 In the System Properties window, click Network
Adapters.
3 Double-click 3Com EtherLink III Adapter.
4 Select the Resources tab.
5 Select Input/Output Range or Interrupt Request Level.
6 Click Change Settings.
7 Change the selected value and click OK.
8 Restart the PC.
The values are changed.