3Com ETHERLINK III - Page 6

iv
4 C ONFIGURING THE 3C509B NIC
Configuring the 3C509B NIC 4-1
Reconfiguring the NIC 4-2
Changing NIC Configuration from ISA to EISA 4-3
Changing NIC Configuration from EISA to ISA 4-4
Changing Configuration Settings 4-5
Configuration Option Settings 4-6
Changing the Settings 4-7
Changing PACE Configuration 4-7
Selecting PACE Applications 4-7
Changing PACE Ranges and Protocols 4-9
PACE Advanced Options 4-10
PACE Settings Descriptions 4-11
5 T ROUBLESHOOTING
Checking the NIC 5-1
Troubleshooting with the Diagnostic Tests 5-2
Starting the Diagnostic Program 5-2
Running the Group 1 Tests 5-3
Running the Group 2 Test 5-4
Assembling a Loopback Plug 5-4
Starting the Group 2 Test 5-5
Running the Group 3 Test 5-5
Setting Up an Echo Server 5-6
Starting the Group 3 Test 5-7
Getting Help If a Test Fails 5-7
Resolving Hardware Resource Conflicts with Windows 95
and Windows NT 5-8
Changing the I/O Base Address or the Interrupt
Request Level 5-8
Removing the 3C509B NIC Software 5-9
Crossover Cable Troubleshooting Tips 5-9
Troubleshooting Hubs with Crossover Cable 5-10
Troubleshooting Tips 5-11
Frequently Asked Questions 5-12