3D Systems, Inc.
Wave Amp Assembly - Waiting on description from W’ville.
X-Axis - The orientation of the part from front to rear on the build platform.
Y-Axis - The orientation of the part from left to right on the build platform.
Z-Axis - The orientation of the part height on the build platform.
.stl File - The les thate are created using a three-dimensional solid Computer-aided design (CAD) software. These les are used to
produce parts.
.3dprint File - Files tht have been saved through the Prepare and Print Setup area of 3DSPRINT are saved in this le format. These
les will also be added to the Files module.
47
To Next Page
Loading...
