3M Clean-Trace NGi Luminometer User Manual

6.03 Setting Date Format
While in the SETUP Menu, use the navigation ( ▲/▼) buttons to
select DATE & TIME and press the Select button. The DATE &
TIME menu can now be seen.
The choice of date formats are:
DD MM YY e.g. 23-01-03
MM DD YY e.g. 01-23-03
YY MM DD e.g. 03-01-23
Date e.g. Thu 23rd
Date, M e.g. Thu 23rd Jan
Date, M, Y e.g. Thu 23rd Jan ‘03
Use the navigation (
▲/▼) buttons to select DATE FORMAT and
press the Change button repeatedly until the required format is
shown.
Press the Back button to return to the SETUP menu or use the
navigation (
▲/▼) buttons to select another item in the DATE &
TIME menu.
6.04 Setting the Time Format
While in the DATE & TIME menu, use the navigation ( ▲/▼)
buttons to select TIME FORMAT. Pressing the Change button
repeatedly will cycle the time format between 12 / 24 hour clock.
When correct, press the Back button to return to the SETUP
menu or use the navigation ( ▲/▼) buttons to select another item
in the DATE & TIME menu.
6.05 Setting the Date
While in the DATE & TIME menu, use the navigation ( ▲/▼)
buttons to select SET DATE ‘Day’ is highlighted only after the
Select function button is pressed. Use the navigation (
▲/▼)
buttons to change the ‘Day’ until correct. Press the OK Button.
The ‘Month’ will now be highlighted on the display. Set the ‘Month’
using the navigation (
▲/▼) buttons then press OK.
The ‘Year’ will now be highlighted on the display. Set the ‘Year’ using the navigation (
▲/▼) buttons then press OK.
Now use the navigation (
▲/▼) buttons to select another item in the DATE & TIME menu or press Back to return
to the SETUP menu.

3M Clean-Trace NGi Luminometer Specifications

General

Brand	3M
Model	Clean-Trace NGi Luminometer
Category	Measuring Instruments
Language	English