3M Clean-Trace NGi Luminometer User Manual

PACKAGE CONTENTS
3M Supplied Equipment:
3M™ Clean-Trace™ NG Luminometer
• Important Safety Information
• 3M™ Clean-Trace™ NG Luminometer complete with detachable Lithium-Ion Battery Pack
• Power Supply
• Quick Start Protocol Card
• 3M™ Clean-Trace™ Data Trending Software (not available with all models)
• Electronic Manual (Multi-Language)
• USB 2.0 min-B communications cable
• Certificate of Conformity
Docking Station
• 3M™ Clean-Trace™ NG Luminometer Docking Station.
Replacement of Fuses
This section applies only to the United Kingdom.
In cases where AC Mains lead power cords are fitted with a fused wall plug the following applies.
In the event of a fuse failure in the power supply AC Main power cord lead wall plug, replace the fuse with only an
approved fuse carrying the BSI or ASTA mark.
The preferred replacement part reference is to BS 1362 for example Bussmann 3A.
The fuse should only be replaced by a competent person.
LIMITED WARRANTY AND DISCLAIMER.
3M warrants that for one year from the date of shipment that the 3M™ Clean-Trace™ NG Luminometer or Docking
Station will substantially perform in accordance with the User Documentation. The terms of this Agreement do not
affect or prejudice the statutory rights of a consumer acquiring the 3M™ Clean-Trace™ NG Luminometer or 3M™
Clean-Trace™ Docking Station otherwise than in the normal course of a business.
THIS WARRANTY DOES NOT APPLY IN THE FOLLOWING CIRCUMSTANCES:
(A) THE 3M™ Clean-Trace™ NG Luminometer or Docking Station HAS BEEN REPAIRED BY PERSONS NOT
AUTHORIZED BY 3M; OR
(B) THE 3M™ Clean-Trace™ NG Luminometer or Docking Station HAS BEEN ALTERED, MODIFIED, OR
MISUSED; OR

3M Clean-Trace NGi Luminometer Specifications

General

Brand	3M
Model	Clean-Trace NGi Luminometer
Category	Measuring Instruments
Language	English