3M Clean-Trace NGi Luminometer - Product Description; Instrument Overview; Accessories; Measure Sample

User Manual
3M
TM
Clean Trace
TM
NGi Luminometer
and Docking Station
Index
1 Product Description
1.01 How the 3M™ Clean-Trace™ NGi Luminometer works to Measure Contamination
1.02 ATP and Surface Hygiene Testing
1.03 ATP and Water Testing
2 Instrument overview
2.01 Parts of the 3M™ Clean-Trace™ NGi Luminometer
2.02 General Features
2.03 Charging the Battery
2.04 Switching the Instrument ON
2.05 Measurement Modes
2.06 Inserting a Test
2.07 Swab Sensor
2.08 Low Power Mode
2.09 PC Communications
3 Accessories
3.01 3M™ Clean-Trace™ NGi Luminometer Docking Station
3.02 3M™ Clean-Trace™ NGi Luminometer Printer
3.03 3M™ Clean-Trace™ NGi Luminometer Soft Carry Case
4 Measure Sample
4.01 What is MEASURE SAMPLE
4.02 How to Test using MEASURE SAMPLE
5 Program Mode
5.01 What is PROGRAM MODE and how do I use it
5.02 How to Use Program Mode
5.03 Retesting
5.04 Reviewing results
5.05 Printing results
6 SETUP Menu
6.01 What the SETUP MENU allows
6.02 How to find the SETUP MENU
6.03 Setting Date Format
6.04 Setting the Time Format
6.05 Setting the Date
6.06 Setting the Time
6.07 Setting the Language
6.08 Performing a Self Check
6.09 Setting the Backlight Timeout
7 Upload Results
7.01 What is UPLOAD RESULTS used for
7.02 How to UPLOAD RESULTS
8 User Guidelines
9 Care of the 3M™ Clean-Trace™ NGi Luminometer
9.01 Cleaning
9.02 Temperature
10 Troubleshooting
10.01 General
10.02 Battery Error Screens
10.03 Communication Error screens
10.04 Self Check Error Screen
10.05 Login and Password Error Screens
10.06 Other Error Screens
10.07 Inadvertent changing of language setting
11 Appendices
11.01 Technical Specifications
11.02 Terms and Conventions