3M Steri-Vac GS Series - User Setup

26
3M
™
Steri-Vac
™
Sterilizer /Aerator GSSeries – Operator’sManual
The Site Setup>Site tab (Figure 27) provides options for entering the facility name, naming the sterilizer, and setting thelanguage. In addition, deferred or pending software updates can be
installed from this screen when the Update software button isblue.
Sterilizer
22.2
˚
C
04/20/2015
12:43:20
98.0
kPa
Select cycle temperature:
65432
1
7
55 °C
Return Apply changes
Model
Facility name
Sterilizer ID
Serial number
Language
English (United States)
GS5-1D
AA121212
City Hospital
Machine 2
Setup
Preferences Cycle Setup Date-Time Network Site
Update software
Figure27.
Site Setup>Site TabFields
10.5.2. UserSetup
Access the User Setup menu (Figure 28) to establish personal identification numbers (PINs) for Supervisors and Service. 3M Health Care service personnel or authorized 3M service
personnel must create the first Supervisor user and PIN. Supervisors can then set up additional Supervisors. Only Service can set up additional Serviceusers. Figures 28- 31illustrate the
use of the User SetupMenu.
The User Name field will accept 1to 20characters from the following character set: A-Z, a-z, and 0-9. Spaces are notaccepted.
Sterilizer
22.2
Select cycle temperature:
˚
C
04/20/2015
05:20:11
65432
1
7
98.0
kPa
Reports
Cycles
Setup
Status
Service
Site setup
User setup
55 °C
Figure28.
User SetupMenu