User’s Manual
User’s ManualUser’s Manual
User’s Manual
EAP200
EAP200EAP200
EAP200 Enterprise Access Point ENGLISH
16
Copyright © 4IPNET, INC.
Please follow the following steps to change the administrator’s password:
Change Password Page
Click on the Utilities main menu button, and then select the Change Password tab.
Enter the old password and then a new password with a length of up to 32 characters, and retype it in
the Re-enter New Password field.
Congratulation!
Now, 4ipnet’s EAP200 is installed and configured successfully.
• It is strongly recommended to make a backup copy of configuration settings.
• After the EAP200’s network configuration is completed, please remember to change the IP
Address of your PC Connection Properties back to its original settings in order to ensure that
your PC functions properly in its real network environments.
To Next Page
Loading...
