User’s Manual
User’s ManualUser’s Manual
User’s Manual
EAP200
EAP200EAP200
EAP200 Enterprise Access Point ENGLISH
60
Copyright © 4IPNET, INC.
7.2.7 Access Control
On this page, the network administrator can restrict the total number of clients connected to the EAP200,
as well as specify particular MAC addresses that can or cannot access the device.
Access Control Settings Page
• Maximum Number of Clients
EAP200 supports various methods of authenticating clients for wireless LAN access. The default
policy is unlimited access without any authentication required. To restrict the station number of
wireless connections, simply change the Maximum Number of Stations to a desired number. For
example, while the number of stations is set to 20, only 20 stations are allowed to connect to the
specified VAP.
To Next Page
Loading...
