4IPNET EAP200 - Repeater

User’s Manual
User’s ManualUser’s Manual
User’s Manual
EAP200
EAP200EAP200
EAP200 Enterprise Access Point ENGLISH
56
Copyright © 4IPNET, INC.
7.2.5 Repeater
To extend wireless network coverage, EAP200 supports 3 options of Repeater type, None, WDS or
Universal Repeater; selecting None will turn off this function.
 Universal Repeater
If Universal Repeater is selected, please provide the SSID of upper-bound AP for uplink connection;
Security Type (None, WEP, or WPA-PSK) can be configured for this Repeater connection. Please note
the security type configured here shall follow upper-bound AP’s for intended connection.
Repeater Settings: Universal Repeater
o The SSID of Upper-Bound AP: Specify the SSID of the upper-bound AP that the system is
used to extend that AP’s wireless service coverage.
o Security Type: None, WEP or WPA-PSK.