4IPNET EAP200 - Page 51

User’s Manual
User’s ManualUser’s Manual
User’s Manual
EAP200
EAP200EAP200
EAP200 Enterprise Access Point ENGLISH
50
Copyright © 4IPNET, INC.
performance for extended coverage. For regular indoor deployments, please keep the default setting.
• Beacon Interval (ms): The entered amount of time indicates how often the beacon signal will be sent
from the access point.
**Due to RF regulation in different nations, available values in the above table will differ.
Table 2 RF Configurations (under normal circumstances in certain countries)
Band Channel Rate Power
Disable N/A N/A N/A
802.11a
36, 40, 44, 48, 52, 56, 60,
64, 100, 104, 108, 112,
116, 120, 124, 128, 132,
136, 140
6M, 9M, 12M, 18M, 24M,
36M, 48M, 54M
802.11b
1, 2, 3, 4, 5, 6, 7, 8, 9, 10,
11, 12, 13
1M, 2M, 5.5M, 11M
802.11g
1, 2, 3, 4, 5, 6, 7, 8, 9, 10,
11, 12, 13
6M, 9M, 12M, 18M, 24M,
36M, 48M, 54M
802.11b+802.11g
1, 2, 3, 4, 5, 6, 7, 8, 9, 10,
11, 12, 13
1M, 2M, 5.5M, 6M, 9M,
11M, 12M, 18M, 24M,
36M, 48M, 54M
802.11a+802.11n
36, 40, 44, 48, 52, 56, 60,
64, 100, 104, 108, 112,
116, 120, 124, 128, 132,
136, 140
6M, 9M, 12M, 18M, 24M,
36M, 48M, 54M,
MCS0~15
802.11n+802.11g
1, 2, 3, 4, 5, 6, 7, 8, 9, 10,
11, 12, 13
1M, 2M, 5.5M, 11M, 12M,
18M, 24M, 36M, 48M,
54M, MCS0~15
Auto, Lowest, Low,
Medium, High, Highest