Aprisa SRx User Manual 1.3.0
Events > Event Action Setup
EVENT ACTION SETUP
This page provides control of the mapping of events to specific actions. Specific alarm events can setup to
trigger outputs.
Action Definition
This parameter shows the number of the event action setup and the maximum number of setups stored.
Action Destination IP Address
This parameter sets the IP address of the radio that will output the action type.
Action Type
This parameter sets the action type that will be activated on the radio.
This action setup does not activate any alarm output
This action setup activates alarm output 1
This action setup activates alarm output 2
To Next Page
Loading...
