Aprisa SRx User Manual 1.3.0
Monitored on
Active Radio
Monitored on
Standby Radio
Monitored on
Standby Radio TX
Monitored on
Standby Radio RX
Configuration Management
The Primary and Secondary radios are managed with the embedded web-based management tool,
SuperVisor, by using either the Primary or Secondary IP address. Configuration changes in one of the radios
will automatically be reflected in the partner radio.
To ensure all remote stations are registered to the correct (active) base station, changes to the Network
Table are automatically synchronized from the active radio to the standby radio. The Network Table is
only visible on the active radio. This synchronization does not occur if the Hardware Manual Lock is active.
To Next Page
Loading...
