Aprisa SRx User Manual 1.3.0
To transfer software into the Aprisa SR radio:
USB Transfer Method
1. Unzip the software release files in to the root directory of a USB flash drive.
2. Insert the USB flash drive into the host port .
3. Click on ‘Start Transfer’.
4. When the transfer is completed, remove the USB flash drive from the host port. If the SuperVisor ‘USB
Boot Upgrade’ setting is set to ‘Disabled’ (see ‘USB Boot Upgrade’ on page 180), the USB flash drive
doesn’t need to be removed as the radio won’t try to load from it.
Go to Supervisor > Software > Manager and activate the Software Pack (see ‘Software > Manager’ on page
184). The radio will reboot automatically.
If the file transfer fails, check the Event History page (see ‘Events > Event History’ on page 166) for more
details of the transfer.
FTP Method
1. Unzip the software release files in to a temporary directory.
2. Open the FTP server and point it to the temporary directory.
3. Enter the FTP server IP address, Username and password into SuperVisor.
4. Click on ‘Start Transfer’.
Go to Supervisor > Software > Manager and activate the Software Pack (see ‘Software > Manager’ on page
184). The radio will reboot automatically.
If the file transfer fails, check the Event History page (see ‘Events > Event History’ on page 166) for more
details of the transfer.
To Next Page
Loading...
