The count display will show the
F-Function and its present setting
will blink.
4. Use the
0
Æ
6
keys to display the
number of the desired setting.
29
For example, let’s select “1” compare all
data.
5. Press the
ENTER
key to save the setting
and move to next F-Function, f-05-02.
6. Continue to enter f-05
comparator settings – refer to
“10-2. F-Functions” for a listing.
If there are no changes to a
F-Function, press the
ENTER
key to move to the next.
7. When finished: press the
STANDBY/OPERATE
key
to exit. Then, press it to turn the display back ON.
Comparator functions will now operate as set.
Viewing Comparator Limits
The comparator limits you are using will be shown by pressing the key.
Set f-09-01="0" to use this mode.
1. Press the
key, then upper
and lower limits will be shown.
2. Press the
key twice, the
display will return to normal.
Changing Comparator Limits Temporarily
Set f-09-01="0" to use this mode.
1. In step 1 above, press the
ENTER
key, the
upper limit value will blink.
2. Change the upper limit using
the 10-key pad and press the
ENTER
key. The upper limit
will stop blinking and the lower
limit blinks.
3. Change the lower limit using the 10-key pad and
press the
ENTER
key. Then the display will
return to normal with the new limits.
f-05-01
81
pcs
Comparator
12345678C000045678id-000001
23SAMUUW (g)12Clear ID
12345670.0000045678901234567
TUV
DEFABC
MNO
6
1
78
PQRS
23
JKLGHI
09
WXYZ
4
#
5
C
.
ENTER
f-05-02
81
pcs
Comparator
12345678C000045678id-000000
23SAMUUW (g)12Clear ID
12345670.0000045678901234567
ENTER
To ENTER
or
MOVE to next
888-100
81
pcs
2AAWEIGHT (kg)ABDEHi Limit
121341567811.100578id-123102
2A3SAAMUUW (g)2BCDLo Limit
123451167111.000123456789098
888-100
81
pcs
2AAWEIGHT (kg)ABDEHi Limit
121341567811.100578id-123105
2A3SAAMUUW (g)2BCDLo Limit
123451167111.000123456789098
ENTER
888-100
81
pcs
2AAWEIGHT (kg)ABDEHi Limit
121341567811.100578id-123102
2A3SAAMUUW (g)2BCDLo Limit
123451167111.000123456789098
U
er limit Lower limit
To Next Page
Loading...
